Lantronix XPort User Guide

8: Setup Mode: Advanced Settings
XPort® Device Server User Guide 73
Note: Developers can license the Lantronix Encryption Library Suite. See
www.lantronix.com/device-networking/utilities-tools.
Enable Enhanced Password
The Enhanced Password setting allows you to set a password of up to 16 characters for
protecting Telnet and Web Page access. We recommend that you select the Y (Yes) option
and enable the enhanced password setting.
Avoid using either the 4 character basic password setting or no password at all as they are
not secure options.
Enable Enhanced Password (Y) ? _
Disable Port 77F0 (Hex)
Port 77F0 is a setting that allows a custom application to query or set the three XPort module
configurable pins when they are functioning as general purpose I/O (GPIO). You may want to
disable this capability for security purposes. The default setting is the N (No) option, which
enables GPIO control. The Y (Yes) option disables the GPIO control interface.
Disable Port 77F0h ? _
Default Settings (Option 7)
Select 7 to reset the unit’s Channel 1 configuration, email settings, and expert settings to the
default settings. The server configuration settings for IP address, gateway IP address, and
netmask remain unchanged. The configurable pins’ settings also remain unchanged. The
specific settings that this option changes are listed below:
Channel 1 Configuration Defaults
Baudrate
9600
I/F Mode
4C (1 stop bit, no parity, 8 bit, RS-232C)
Flow
00
Port number
10001
Connect Mode
C0 (always accept incoming connection; no active
connection startup)
Send '+++' in Modem Mode
Enabled
Show IP addr after 'RING'
Enabled
Auto increment source port
Disable
Hostlist retry counter
3
Hostlist retry timeout
250 (msec)

Lantronix XPort Specifications

General

Brand	Lantronix
Model	XPort
Category	Server
Language	English