5: Configuration via Telnet or Serial Port (Setup Mode)
XPort® Device Server User Guide 41
To establish a Telnet connection:
1. From the Windows Start menu, click Run and type the following command, where x.x.x.x
is the IP address, and 9999 is the unit’s fixed network configuration port number:
Windows: telnet x.x.x.x 9999
UNIX: telnet x.x.x.x:9999
2. Click OK. The following information displays.
Figure 5-1. MAC Address
MAC address 0080A394616D
Software version V6.10.0.0RC3 (140317) XPTEXE
AES library version 1.8.2.1
Press Enter for Setup Mode
3. To enter Setup Mode, press Enter within 5 seconds. The configuration settings display,
followed by the Change Setup menu.
Figure 5-2. Setup Menu Options
Change Setup:
0 Server
1 Channel 1
3 E-mail
5 Expert
6 Security
7 Defaults
8 Exit without save
9 Save and exit Your choice? _
4. Select an option on the menu by entering the number of the option in the Your choice ?
field and pressing Enter.
5. To enter a value for a parameter, type the value and press Enter, or to confirm a current
value, just press Enter.
6. When you are finished, save the new configuration (option 9). The unit reboots.
To Next Page
Loading...
Need help?
General