Lenze 8200 vector Mounting Instructions

7
Commissioning
Using the keypad XT EMZ9371BC − Parameter setting
EDK82EV113 DE/EN/FR 8.1
L
128
Description
The keypad is available as accessory. A full description of the keypad can be obtained from
the Instructions included in the keypad delivery.
Plug in the keypad
It is possible to plug in the keypad onto the AIF interface or remove it during operation.
As soon as the keypad is supplied with voltage, it carries out a self−test. The operation level
indicates, when the keypad is ready for operation.
Front view Operating level
YZ
y
z
T V
S U
dABbc
p
SHPRG
Para
Code
Menu
0050
00
50.00_Hz
MCTRL-NOUT
0
1
3
4
5
6
7
8
2
YZ
y
z
T V
S U
d
0050
00
50.00 Hz
20 %
9371BC002 9371BC003
Display elements

Status display basic device
Display Meaning Explanation

Ready for operation

Pulse inhibt active Power outputs inhibited

Adjusted current limitation is exceeded in
motor−mode or generator−mode

Speed controller 1 in limitation Drive torque−controlled

Active fault
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Lenze 8200 vector Specifications

General

Category	DC Drives
Series	8200 vector
Enclosure Rating	IP20
Control Method	Vector control
Communication	CANopen, DeviceNet, Profibus
Protection Features	Overcurrent, overvoltage, undervoltage, overtemperature, short circuit
Humidity	< 95 % non-condensing
Operating Temperature	0 to +45 °C (derating above 40°C)