7
Commissioning
The most important codes for commissioning
EDK82EV113 DE/EN/FR 8.1
L
140
) Note!
l The following table describes in detail the codes mentioned in the examples
for commissioning!
l Do not change codes, the meaning of which is unknown to you! All codes
are described in detail in the System Manual.
How to read the code table
Column Abbreviation Meaning
Code
Cxxxx Code Cxxxx
l The parameter value of a code can be different in
every parameter set.
l Parameter value accepted immediately (ONLINE)
1 Subcode 1 of Cxxxx
2 Subcode 2 of Cxxxx
* Parameter value of the code is the same in all parameter sets
Keypad E82ZBC Changed parameters will be accepted after pressing
Keypad XT EMZ9371BC Changed parameters will be accepted after pressing
Keypad E82ZBC Changed parameters will be accepted after pressing
if the controller is inhibited
Keypad XT EMZ9371BC Changed parameters will be accepted after pressing
if the controller is inhibited
(A) Code, subcode or selection are only available when using an Application−I/O
uSEr
With Lenze setting the code is available in the USER−menu
Name Name of the code
Lenze Lenze setting (value at delivery or after restoring the delivery state with C0002)
à
Further information can be obtained from "IMPORTANT"
Selection 1 {%} 99 Min. value {unit} Max. value
IMPORTANT − Brief, important explanations
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
