Diagnostic aids 3-27
7013-XXX
Reports
Menu Settings Page
Print the menu settings pages to list the customer settings and to verify printer options are installed correctly. It
is helpful to print the customer settings before you restore factory defaults or make major changes.
To print the menu settings:
1. Select Reports from the Config Menu, and press Select ( ).
2. Select Menu Settings Page, and press Select ( ).
Event Log
Lets the system support person print a limited set of the information contained in the Diagnostics Menu version
of the printed Event Log. For a sample of a printout, see “Event Log” on page 3-15. The limited Configuration
log and the full Diagnostics log printed versions show the same operator panel messages when they print and
follow the same layout guidelines.
To print the event log:
1. Select Reports from the Config Menu, and press Select ( ).
2. Select Print Log, and press Select ( ) to begin printing the log.
Panel Menus
Lets the system support person enable or disable the operator panel menus. Selecting On (the default) allows
users to change values for the printer. Off disables the users’ access to menus. If a user presses Menu (),
they receive a message that the panel menus are locked. When set to Off, this setting restricts all menu access,
even to menus or items set for PIN access. However, when set to On, all PIN restrictions are in restored.
This menu item appears only when the PJL PASSWORD Environment variable is set to 0.
PPDS Emulation
Activates or deactivates the Personal Printer Data Stream (PPDS) emulation language. This menu item appears
only if the PPDS interpreter is available.