LINET GRACIELLA User Manual

D9U004GKC-0101
64
14 Accessories
14.1 Infusion stand
The stand is made of stainless steel. Height adjustable telescopically.
WARNING!
The maximum load capacity of one hook is 2 kg!
The maximum load capacity is 8 kg
Risk of injury due to use of incorrect accessories or because of incorrect use!
Infusion stands must only be used for their intended use. Always read the User manual!
► Only mount an infusion pump to the lower (wider) telescopic section of an infusion stand
above the head end.
► Never mount an infusion pump to the upper (thinner) telescopic section of an infusion
stand.
► Ensure the infusion pump will not collide with any movable parts of the chair (especially
Backrest part) or with a patient. This must be veried after installation.
► Do not over tighten the infusion pump clamps during installation. Over tightening may
damage the infusion stand.
► Infusion pump can be only used if the infusion stand is tted in the accessory holder
socket in the head section on the under carriage of the chair.
► Do not use infusion stands as a means of steering / pushing the chair during transport of
the chair.
ACCESSORIES Head
end
Foot
end
on the sides
Infusion stand
a
Eurobar holder
a
Headrest (cushion)
a
Physician's chair —ergonomic
a
Physician's chair —ergonomic -
adjustable by feet
a
Physician's chair, height-adjustable,
manual locking
a
Short cover
a
Long cover
a
WARNING!
► Use exclusively infusion stands with 4 hooks for hanging IV bags or baskets for intravenous solutions.
► Ensure that the safe operating load of 2 kg is not exceeded for the individual hooks of the infusion stand.
► Make sure that the max. operating load of 15 kg is not exceeded for the infusion stand.
Infusion stands are designed to provide suitable support for mounting infusion pumps / linear dispensers and for hanging infu-
sion bags or bottles.

LINET GRACIELLA Specifications

General

Brand	LINET
Model	GRACIELLA
Category	Medical Equipment
Language	English