D9U004GKC-0101
71
18 Disposal
18.1 Environmental Protection
LINET® is aware of the importance of environmental protection for future generations. Within the whole company is applied the
environmental management system, which is in accordance with the internationally agreed standard ISO 14001. Compliance with
the requirements of this standard is tested annually by an external audit performed by an authorized company. Based on Directive
No. 2002/96/EC (WEEE Directive - on waste electrical and electronic equipment), LINET, s.r.o. Is registered in the list of manufac-
turers of electrical equipment at the Ministry of the Environment of the Czech Republic..
The materials used in this product are not hazardous to the environment. LINET® products meet the applicable requirements of
national and European legislation in the areas of RoHS and REACH, so they do not contain any prohibited substances in excessive
quantities.
None of the wooden parts is made of tropical wood (such as mahogany, rosewood, ebony, teak etc.) or from timber from the Ama-
zon region or similar rainforests. The product noise (sound pressure level) meets the requirements of the regulation for the protec-
tion of public health against the adverse effects of noise and vibration in protected indoor areas of buildings (according to the IEC
60601-2-52 standard). The packaging materials used meet the requirements of the Packaging Act.
Regarding the disposal of packaging materials after installation of products and the possibility of free take-back of packaging
through an authorized company (more detailed information can be found at www.linet.cz), contact your sales representative or the
manufacturer's customer service.
18.2 Disposal
The main purpose of the obligations arising from the European Directive No. 2012/19/EU on waste electrical and electronic equip-
ment (national regulation in Act No. 185/2001 Coll. on waste, as amended, and in the Decree of the Ministry of the Environment
No. 352/2005 Coll. (as amended) is to increase the reuse, regeneration of material and regeneration of electrical and electronic
equipment to the required level, thus preventing the production of waste and thus preventing the possible harmful effects of haz-
ardous substances in electrical and electronic equipment on human health and the environment. LINET® electrical and electronic
equipment with a built-in battery or accumulator is designed so that used batteries or accumulators can be safely disposed of by a
qualied LINET® service technician. The built-in battery or accumulator has information about their type.
18.2.1 Within Europe
Disposal of Electrical and Electronic Equipment:
► Electrical and electronic equipment must not be disposed of as municipal waste.
► Dispose of this device at designated collection points or collection points.
Disposal of other equipment:
► The device must not be disposed of as municipal waste.
► Dispose of this device at designated collection points or collection points.
LINET® is involved in the collection system together with REMA System providing take-back (see www.remasystem.cz/sber-
na-mista/).
By transporting electrical and electronic equipment to the collection point, you are involved in recycling and saving primary raw
materials while protecting the environment from the effects of improper disposal.
18.2.2 Outside Europe
► Dispose the product or its components in accordance with local laws and regulations!
► Have the device disposed of by an authorized waste disposal company!
To Next Page
Loading...
Need help?
General
