Linksys LAPN300 User Manual

802.1x Authentication Setup
1.
Open the properties for the wireless connection, by selecting
Start > Control Panel > Network
Connections.
2.
Right-click on the
Wireless Network Connection , and select Properties .
3. Select the Authentication Tab, and ensure that Enable network access control using IEEE
802.1X
is selected, and Smart Card or other Certificate is selected from the EAP type.
Figure 75: Authentication Tab
108

Linksys LAPN300 Specifications

General

Color	multi, white
Wi-Fi Speed	300 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.08 pounds