Oven controls
18
Sensor controls under the display
Sensor
control
Function
Use this sensor control to access the settings when the
operating mode selector is in the 0 or the Lighting position.
Depending on which menu you are in, this sensor control will
take you back a level or back to the main menu.
OK By selecting this sensor control you can access functions such
as the minute minder, save changes to values or settings or
confirm instructions.
If no cooking programme is in progress, you can use this sensor
control to set a minute minder (e.g. when boiling eggs) at any
point.
If a cooking programme is in progress at the same time, you can
set a minute minder, the cooking duration and a start or end time
for the programme.
Symbols
The following symbols may appear in the display:
Symbol Meaning
This symbol indicates that there is additional information and
advice about using the appliance. Press the OKsensor control to
confirm the information.
Minute minder
A tick indicates the option which is currently selected.
Some settings, e.g. display brightness and buzzer volume are
selected using a bar chart.
The system lock prevents the oven being switched on by mistake
(see “Settings – System lock ”).
Remote control (only appears if you are in the Miele@home
system and have selected the Remote control| On setting)