Cleaning and care
68
Refit the upper of the two middle
panes in such a way that the material
number is legible (i.e. not reversed).
The pane must rest on the retainers.
Refit the seal.
Push the inner pane with the matt
printed side facing downwards into
the plastic strip and place it between
the retainers.
Flip both the glass pane retainers
inwards to close them.
The door is now reassembled.
Fitting the door
Hold the door securely on both sides
and carefully fit it back into the hinge
retainers.
Make sure that you fit the door
straight.
Open the door fully.