Miele TDA 140 C User Manual

Changing the programme sequence
18
Once a programme has started
... changing the programme once it
has star
ted
You cannot change to another
pr
ogramme once a programme has
started (this prevents unintentional
alterations).
If you try to change a programme, 

lights up until the original programme is
reset.
You will need to cancel the current
pr
ogramme before you can select a
new one.
... cancelling a programme
 T
urn the programme selector to
Finish.
The items will be cooled down,
depending on the t
emperature reached
and how long they have been dried for.
The programme is not finished until 
lights up.
 Switch the dryer off and then on
again.
 Selec
t and start a new programme
immediately.
Adding or removing laundry
aft
er a programme has started
 Restar
t the programme
immediately after adding or
removing items.
Otherwise remove all items and
spread them out to cool down
completely.
Danger of burning.
The drum and the items can get very
hot.
Do not touch the back of the drum
when adding o
r removing items.
 P
ress the
Door butt
on.
 Add
or remove items.
 Close the door.
 P
ress the
Start butt
on.
Programme duration
Altering the programme sequence can
cause adjustments in the h min d
isplay.

Miele TDA 140 C Specifications

General

Cord length	2 m
Control type	Buttons, Rotary
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Cycle time	109 min
Noise level	63 dB
Drying class	-
Drum capacity	7 kg
Current	10 A
AC input voltage	220-230 V
Energy consumption	4.14 kWh
Annual energy consumption	494 kWh

Weight and Dimensions

Depth	580 mm
Width	595 mm
Height	850 mm
Weight	50000 g
Depth with door open	1060 mm