Programmable functions
53
Extending the cooling down
time
The cooling down phase which takes
p
lace before the end of a programme
can be lengthened in two stages if
required. This cools the garments
down even more.
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
P
ress
Start and k
eep it pressed in
whilst carrying out steps -.
Sw
itch the dryer on.
Wait until the indicator light for the
Start butt
on lights up constantly . . .
.
. . and then release the
Start
b
utton.
T
urn the programme selector to
Cottons Machine iron.
The Empty container indic
ator light will
flash seven times.
The option selected will be displayed
by a number
which will alternate with
.
F
actory default setting
The cooling down time will be
e
xtended by five minutes
(the
Clean out airways indicat
or light
will also flash once)
The cooling down time will be
e
xtended by ten minutes (the
Clean
out airways indica
tor light will also
flash twice)
P
ressing the
Start butt
on switches
between the options.
Sw
itch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
