Programmable functions
50
Anti-crease
Helps prevent creasing, if laundry is
not no
rmally removed immediately
after the end of a programme. The
drum rotates at intervals for 2 hours
after the end of a programme.
The anti-crease function
– is activated ex-works. You can
sho
rten the duration of the anti-
crease phase or deactivate it if
wished.
– is active in all programmes, except
Woollens handcare.
– should always be switched on.
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
P
ress
Start and k
eep it pressed in
whilst carrying out steps -.
Sw
itch the dryer on.
W
ait until the indicator light for the
Start butt
on lights up constantly . . .
. . . and then release the Start
button.
T
urn the programme selector to
Cottons Normal .
The Empty container indic
ator light will
flash three times.
The option selected will be displayed
by a number
which will alternate with
.
An
ti-crease action off
An
ti-crease 1 h)
(The
Clean out airways will also flash
once)
An
ti-crease 2 h (factory default
setting
(The
Clean out airways will also flash
twice)
P
ressing the
Start butt
on switches
between the options.
Switch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
