Caring for the environment
2
Disposal of the packing
mat
erial
The packaging is designed to protect
th
e appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
u
se of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old appliance
Electrical and electronic appliances
o
ften contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your appliance. Please
do not therefore dispose of it with your
household waste.
Please dispose of it at your local
commu
nity waste collection / recycling
centre.
Ensure that it presents no danger to
chil
dren while being stored for disposal.
Energy saving tips
To avoid unnecessarily long drying
times and high
consumption of energy:
– Make sure that your laundry is
thor
oughly spun before drying. The
higher the spin, the greater the
savings that can be made in energy
and time during drying.
– Load according to the optimum
amo
unt of laundry recommended for
the programme being used.
Underloading is uneconomical.
Overloading gives a poorer quality of
drying and may cause unnecessary
creasing.
– Make sure the room temperature is
no
t too high. If there are other heat
producing appliances in the room in
which the dryer is located, make sure
the room is well ventilated and switch
the other appliances off, if possible.
– After every cycle remove the fluff
fr
om the fluff filters in the door and in
the door opening.
– Check the condenser unit once a
year and clea
n it if necessary.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
