Programmable functions
51
Switching the buzzer on/off
A buzzer sounds (at intervals for a
maximu
m of 1 hr) to let you know the
programme has finished.
The dryer is delivered with the buzzer
switched on, but you can switch it off if
you wish.
The buzzer will still sound if there is a
fault, even if it has been switched off.
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
P
ress
Start and k
eep it pressed in
whilst carrying out steps -.
Sw
itch the dryer on.
W
ait until the indicator light for the
Start butt
on lights up constantly . . .
.
. . and then release the
Start
b
utton.
T
urn the programme selector to
Cottons Low temperature.
The Empty container indic
ator light will
flash four times.
The option selected will be displayed
by a number
which will alternate with
.
Bu
zzer off
Bu
zzer on (factory default setting)
(The
Clean out airways indicator light
will also flash once).
P
ressing the
Start butt
on switches
between the options.
Sw
itch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
