Installation and connection
40
Electrical connection U.K.
All electrical work should be carried out
by a suitably q
ualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Ensure power is not supplied to the
appliance un
til after installation work
has been carried out.
The appliance is supplied with a mains
cable with moul
ded plug ready for
connection to a 230-240V mains
supply.
Please ensure the connection data
quot
ed on the data plate match the
household mains supply.
Connection should be made via a
suitable switche
d socket which is easily
accessible after installation.
For extra safety it is advisable to protect
the appliance
with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
Do not connect via an extension lead.
Ext
ension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until
a suitable r
eplacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
appr
oved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
WARNING: THIS APPLIANCE
MUS
T BE EARTHED
To Next Page
Loading...
Need help?
General
Weight and Dimensions
