Programmable functions
48
Altering the residual moisture
level in
the Cottons
programme
The tumble dryer is designed to dry
effectivel
y using as little energy as
possible. However, if you require the
laundry to be drier or damper, you can
reduce or increase the default residual
moisture in this programme.
Exception: The Normal dr
ying level
remains unchanged.
Follow steps (,, ...)
to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
t
o
Finish.
Press Start and keep it pressed in
whilst carrying out steps -.
Sw
itch the dryer on.
W
ait until the indicator light for the
Start butt
on lights up constantly . . .
.
. . and then release the
Start
b
utton.
The Empty container indic
ator light will
flash once.
The option selected will be displayed
by a number
which will alternate with
.
L
aundry will be damper
F
actory default setting
(The
Clean out airways indicator light
will also flash once)
L
aundry will be drier
(The
Clean out airways indica
tor light
will also flash twice)
P
ressing the
Start butt
on switches
between the options.
Sw
itch the dryer off.
The setting you have selected is now
st
ored in memory. You can change it
again at any time.
To check the setting:
C
arry out steps -.
Switch the dr
yer off after checking.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
