Miele WTF 130 WPM User Manual

Settings
104
Temperature unit
The temperature can be displayed as
degrees Celsius (°C) or Fahrenheit (°F).
Factory default setting: Celsius (°C).
Display brightness
There are seven different display
brightness settings.
The brightness changes as soon as you
select a different setting.
Dark display
To save energy, the display will go out
and the Start/Stop button will flash
slowly.
Options
– On
The display will go out after 10
minutes.
– On (not in current programme) (Fact-
ory default setting)
The display will remain on while the
programme is running but will go out
10 minutes after the end of the pro-
gramme.
– Off
The display will remain on.
Machine switch-off
The washer-dryer will switch off auto-
matically after the end of the pro-
gramme/anti-crease phase or after be-
ing switched on if no further selection
is made.
Options
– After 15 minutes (Factory default set-
ting)
The washer-dryer will switch itself off
after 15 minutes.
– After 20 minutes
The washer-dryer will switch itself off
after 20 minutes.
– After 30 minutes
The washer-dryer will switch itself off
after 30 minutes.
Display maximum load
After a programme is selected the
maximum load appears in the display
for a short time. You can switch this
off.
Factory default setting: Display max-
imum load is switched on.
Display programme name
The name of the selected programme
is shown briefly in the display.
The factory default setting forDisplay
programme name is switched off.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm