Miele WTF 130 WPM User Manual

Changing the programme sequence
68
Adding or removing laundry
You can add or remove items during the
first few minutes after the programme
has started.
 Press the Start/Stop button.
The following will appear in the display:
Cancel programme

 Scroll up the list with the  or 
sensor to:
Add laundry

 Touch the OK sensor.
If this message does not appear in the
display then it is no longer possible to
add items of laundry.
The programme will stop and the door
will unlock.
 Pull open the door.
 Add or remove items.
 Close the door.
 Press the Start/Stop button.
The programme will continue.
Please note:
Once a programme has started suc-
cessfully the washer-dryer cannot re-
cognise any adjustment to the load.
For this reason, if laundry is added or
removed after the start of a programme,
the machine will always complete the
programme cycle assuming a full load.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm