Miele WTF 130 WPM User Manual

WASHING
27
5. Add detergent
Detergent is depensed either via the de-
tergent drawer or with Cap dos-
ing.
 Detergent dispenser drawer
Too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater ele-
ments.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
– High water consumption (an addi-
tional rinse cycle will automatically
switch in).
– A burden to the environment.
 Pull out the detergent dispenser
drawer and add detergent to the
compartments as follows:

Detergent for the pre-wash (divide the
total recommended amount as follows:
⅓ to compartment and ⅔ to com-
partment)

Detergent for the main wash, including
Soak, if selected
/
Fabric conditioner, liquid starch or cap-
sules.
See "WASHING", "Detergent" for fur-
ther information about detergents and
how much to dispense.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm