Miele WTF 130 WPM User Manual

WASHING
30
6. Start the programme
 Press the flashing Start/Stop button.
The door will lock (the  symbol will
appear in the display to show this) and
the programme will start.
The programme status will appear in
the display.

1:39Main wash
h
The washer-dryer will keep you updated
on the programme status and the time
remaining for the programme to run.
If a delay start time has been selected,
this will count down in the display until
the programme starts.
The drum lighting switches off once the
programme has started.
7. At the end of a programme
The door is still locked during the anti-
crease phase and the following will ap-
pear alternately in the display:

Anti-crease/Finish

Press Start/Stop
 Press the Start/Stop button.
The door will unlock.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull open the door.
 Unload the drum.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Check that all items have been re-
moved from the drum.
 Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to al-
low the drum to dry.
 Switch the washer-dryer off with the
 button.
 If applicable, remove the used cap-
sule from the detergent dispensing
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm