Miele WTF 130 WPM User Manual

DRYING
52
Select "Drying".
 Touch theWashing and Drying sensor
until just the Drying indicator light re-
mains on.
The Washing indicator light must not
be lit up, as this would mean that the
relevant washing programme would
begin before the drying process.
The maximum (dry) load for the drying
programme selected will appear in the
display. This will then be replaced by
the standard display.
3. Load the drum
Open the door
 Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with laun-
dry.
 Load the laundry loosely in the drum.
Overloading places a strain on the
textiles and affects drying results.
Observe the maximum loads given in
the "Programme chart".
Close the door
 Make sure that no items are caught
between the door and the seal.
 Shut the door with a gentle swing.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt dur-
ing the drying programme and cause
damage to the machine and the
laundry.
These dispensing aids must be re-
moved from laundry before drying.
The water supply stopcock must be
kept open for drying.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm