Miele WTF 130 WPM User Manual

WASHING AND DRYING
64
4. Select programme settings
 Select the degree of soiling level.
 Select the temperature, spin speed
and drying level and confirm each
withOK.
The minimum spin speed is limited to
800rpm.
In some programmes it cannot be
altered.
To prevent laundry forming a ring
against the drum wall, the spin speed
is limited to a maximum of 1200rpm
when washing and drying in a continu-
ous sequence.
 Select further options if required.
The spin speed for washing is used for
the thermospin.
The spin speed is limited to a max-
imum of 900rpm if Extra quiet has
been selected.
The thermospin is not carried out if
timed drying is selected.
 Select a delay start time if required.
5. Add detergent
 Dispense detergent either with Cap
dosing or via the detergent dispenser
drawer.
6. Programme start/finish
 Press the Start/Stop button.
The door will lock and the programme
status will appear in the display.
The anti-crease phase will start at the
end of the programme.
The door remains locked during the
anti-crease phase.
 Press the Start/Stop button.
The door will unlock.
If you have unloaded the drum dur-
ing the anti-crease phase make sure
you spread it out to cool down.
The door unlocks automatically at the
end of the anti-crease phase.
 Pull the door open and unload the
drum.
See "After each washing or drying
programme".

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm