Miele WTF 130 WPM User Manual

Changing the programme sequence
66
Cancelling a programme
You can cancel a programme at any
time after it has started.
 Press the Start/Stop button.
The following will appear in the display:
Cancel programme

 Touch the OK sensor.
– During washing:
The suds will be pumped away and the
programme is cancelled.
– During drying:
The laundry will be cooled down before
the door can be opened.
If you want to remove the laundry:
 Pull the door open and unload the
drum.
If you want to select a different pro-
gramme:
 Close the door.
 Select the programme you want.
 Add detergent to the detergent dis-
penser drawer, if necessary.
 Press the Start/Stop button.
The programme will start.
Interrupting a programme
 Switch the washer-dryer off with the
 button.
 To continue the programme switch
the washer-dryer back on with the 
button.
 Do not switch the washer-dryer
off before the drying programme has
finished. If this is done, the laundry
must be hung up or spread out to
cool it down.
To change the programme
You cannot change to a different pro-
gramme after the current one has star-
ted. You will need to cancel the current
programme before you can select a
new one.
To alter the temperature
The temperature of a wash programme
can be changed within the first 5
minutes of the programme starting, ex-
cept in the Cottons programme.
 Press the Temperature button.
 Change the temperature using the
and  sensors and confirm your
choice with OK.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm