Miele WTF 130 WPM User Manual

What to do if...
82
The door will not open
Problem Cause and remedy
The door will not open
during a programme.
The door is locked during a programme.
 Press the Start/Stop button.
 SelectCancel programme or Add laundry with the 
or  sensors.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the washer-dryer
is unable to drain.
 Clean the drain filters and the drain pumps as de-
scribed in "Opening the door in the event of a
blocked drain outlet and/or power failure".
The water level in the drum is too high.
 Cancel the programme. The water will be pumped
away.
At the end of the pro-
gramme or after a pro-
gramme cancellation:
Cooling down or Comfort
cooling appears in the
display.
For safety reasons the door cannot be opened if the
temperature in the drum exceeds 55°C during wash-
ing or 70°C during drying.
 Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.
The following appears
in the display:
 Service Door release
The door lock has jammed.
 Call Service.

Miele WTF 130 WPM Specifications

General

Door hinge	Right
Control type	Buttons, Rotary
Loading type	Front-load
Product color	White
Built-in display	Yes
Appliance placement	Freestanding
Half-load	-
Drying capacity	4 kg
Washing capacity	7 kg
Delay start (max)	24 h
Spin-drying class	A
Maximum spin speed	1600 RPM
Noise level (wash)	- dB
Water consumption washing per cycle	90 L
Energy consumption washing per cycle	- kWh
Water consumption washing & drying per cycle	- L

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm