14
Pellerin Milnor Corporation
� Know the location of the main machine disconnect and use it in an emergency to re-
move all electric power from the machine.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
� Do not remove guards, covers, or panels.
� Do not reach into the machine housing or frame.
� Keep yourself and others off of machine.
� Know the location of all emergency stop switches, pull cords, and/or kick plates and
use them in an emergency to stop machine motion.
WARNING: Crush Hazards — Tilting machines only—The machine housing will
crush your body or limbs if it descends or falls while you are under it.
Housing can descend with power off or on. Manual operation of tilting
valves overrides safety interlocks. Improper operation of manual tilting
valves may cause the housing to descend.
� Do not remove guards, covers, or panels.
� Do not reach into the machine housing or frame.
BNWHTS06 / 2019202
BNWHTS06 0000233643 A.7 1/2/20 2:19 PM Released
2.2 External Mechanical Hazards
BNWHTS06.C01 0000235039 A.4 A.7 A.2 1/2/20 2:19 PM Released
2.2.1 Safety Placards—External Mechanical Hazards
BNWHTS06.C02 0000235071 A.4 A.7 1/2/20 2:19 PM Released
One or more safety placards on the machine, similar to the following, alert personnel to hazards
around the front, sides, rear or top of the machine.
Figure 4. External Mechanical Hazards
For All Users
To Next Page
Loading...
Need help?
General
