18
Pellerin Milnor Corporation
WARNING:
Multiple Hazards — Operating the machine with an inoperative safety
device can kill or injure personnel, damage or destroy the machine, dam-
age property, and/or void the warranty.
� Do not tamper with or disable any safety device or operate the machine with a mal-
functioning safety device. Request authorized service.
WARNING: Electrocution and Electrical Burn Hazards — Electric box doors—Op-
erating the machine with any electric box door unlocked can expose high
voltage conductors inside the box.
� Do not unlock or open electric box doors.
WARNING: Entangle and Crush Hazards — Guards, covers, and panels—Operating
the machine with any guard, cover, or panel removed exposes moving
components.
� Do not remove guards, covers, or panels.
WARNING: Crush Hazards — Down limit switches (machines with front and rear tilt
cylinders)—Failure of both front or both rear limit switches allows the
seated tilt wheels on a tilted machine to lift from their cradles. The housing will fall and
lunge forward or rearward.
� Do not operate the machine with any evidence of damage or malfunction.
2.4.1.2 Hazards Resulting from Damaged Mechanical Devices
BNWHTS04.C04 0000235046 A.4 A.6 A.3 1/2/20 2:19 PM Released
WARNING: Multiple Hazards — Operating a damaged machine can kill or injure per-
sonnel, further damage or destroy the machine, damage property, and/or
void the warranty.
� Do not operate a damaged or malfunctioning machine. Request authorized service.
WARNING: Explosion Hazards — Cylinder—A damaged cylinder can rip apart dur-
ing extraction, puncturing the shell and discharging metal fragments at
high speed.
� Do not operate the machine with any evidence of damage or
malfunction.
WARNING: Explosion Hazards — Clutch and speed switch (multiple motor ma-
chines)—A damaged clutch or speed switch can permit the low speed mo-
tor to engage during extract. This will over-speed the motor and pulleys
and can cause them to rip apart, discharging metal fragments at high speed.
For All Users