MIMAKI JV5 Series Maintenance Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
Maintenance Manual Change Tracking P.3
Service Documents > Maintenance Manual Change Tracking
Maintenance Manual Change Tracking
7.2.1 Added 1.0 New item [Y Drive Belt Noise] was added.
7.2.2 Added 1.0 New item [Media Attachment to the Platen] was added.
Date 2008.09.17 Manual Ver. 1.10 Remark
Index Status Rev. Changes
1.1.1 Revised 1.10 [Indication on LCD] “DPC”  “PDC”
Revised 1.10 [Indication on LCD] “V1.00”  “V1.00.0”
Added 1.10 Step 6: “When the fuse F13 of the main PCB assy is blown, ...”
1.1.2 Revised 1.10 [Indication on LCD] “DPC”  “PDC”
Revised 1.10 [Indication on LCD] “V1.00”  “V1.00.0”
Added 1.10 Step 4: “When the fuse F13 of the main PCB assy is blown, ...”
Added 1.10 Step 5: “(Except firmware update)”
1.1.3 Added 1.10 Step 4: “(Only when MAIN power is on)”
Added 1.10 Step 5: “(Refer to “1.1.6 Operation for Connecting the Heads”)”
1.1.4 Revised 1.10 Step 2, 4: “When it cannot be detected ...”
 “When detection is impossible or the number of pinch rollers is not recognized, ...”
Added 1.10 Tips Box: “(Only during Step 3 above)”
1.1.5 Revised 1.10 Tips Box: “[PRINT MODE]  [CUT MODE] was switched.”
 “The machine draws a stored pattern which can be selected ...”
1.1.8 Added 1.10 Tips Box: “In service mode, the buzzer sounds ...”
1.2.3 Added 1.10 Step 3: “Press [FUNCTION], and the maintenance washing liquid ...”
1.2.9 Revised 1.10 [Indication on LCD]: All the indications on the display revised
Revised 1.10 Description of status No1-1: “... near full or more.”  “... full or more.”
Erased 1.10 Step 2: “The [!WASTE TANK] is displayed in LOCAL mode.”
Revised 1.10 Important Box: “... is cumulatively counted in this unit.”
 “... is not cumulatively counted in this unit.”
1.3.2 Revised 1.10 In Table: “Execution status when an error occurs” (5, 6, 7, 8)
1.3.6 Revised 1.10 In Table: “Ink consumption through one supply path”
1.3.9 Erased 1.10 Item: “Selection of model”
2.1.1 Revised 1.10 “Connection Diagram Inside the Main Body” revised
2.3.1 Added 1.10 Volume specification: “Type”
Added 1.10 Fuse rating
2.3.2 Added 1.10 Fuse rating
2.3.6 Revised 1.10 List of connectors CN7: “AUX.”  “P Head Lock Solenoid”
2.3.7 Revised 1.10 List of connectors CN19: “Debug Monitor”  “Not equipped”
“CPLD writing”  “AUX.”
Revised 1.10 List of connectors CN21: “X-axis Motor”  “AUX.”
2.3.8 Revised 1.10 List of connectors CN14: “Debug Connector”  “None”
Added 1.10 List of connectors CN14: “AUX.”
2.3.11 Revised 1.10 List of connectors CN2: “For CPLD writing”  “None”
Added 1.10 List of connectors CN2: “AUX.”
3.1.1 Revised 1.10 Item: “Cartridge Assy”  “Print Head Unit Assy”
Date 2008.12.06 Manual Ver. 1.20 Remark
Status Index Rev. Changes

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English