Mindray ME7 User Manual

4 - 44 Operator’s Manual
4 Setup
To add an iStorage service
1. Set the iStorage server properties as described above.
2. Tap [Add] to add the service to the service list.
To modify a network service
1. Select the service to be updated in the service list.
2. Modify the parameters in the upper part of the screen and tap [Update] to update the setting.
4.9 Print Preset
This screen is used to set up the printer and image printing.
MultiBackend IP Address IP address of the eGateway service.
Port Port for transmitting.
DocServer IP Address IP address of the eGateway service.
Port Port for transmitting.
Image/Cine/PDF
Report
Set the shared document content.
/ Clear Click to cancel the parameter setting.
Add Click to add the Network service to the service list.
Update Select an item in the service list, change the
parameters in the above area, and click [Update] to
update the item in the service list.
Delete Click to delete the selected service in the service list
Default Set the eGateway server as the default.
Select an item in the service list, click [Default] and
you can see “Y” in the Default column.
Connect Click to verify whether the connection is normal.
Type Item Description

Mindray ME7 Specifications

General

Brand	Mindray
Model	ME7
Category	Diagnostic Equipment
Language	English