System Installation 3-35
3) Click [OK], and the system prompts the following message:
4) Click [Yes] to wipe the patient data.
5) Select [User Define] and click [Confirm].
6) Input the password and click [Confirm] to finish the password setting.
1. If you want switch to Factory Default, perform steps 1 to 6 again. The
password is the same as that of the User Define.
2. When you set password, multi-language and Chinese characters are not
supported.
2. Anti-Virus
The system provides two pieces of anti-virus software: Windows Defender and McAfee. They can
effectively prevent the ultrasound system from being attacked by virus, spyware, or other malware.
Windows Defender is already installed on the system.
The McAfee software is an option. If the McAfee software is installed, the system displays
"McAfee is running". If you want to buy McAfee, contact Mindray representatives.
Notes: 1. McAfee cannot be uninstalled after successful installation.
2. After the option is installed, the system will be restarted. And
after restart, the system installs McAfee automatically, which
needs about one hour.
3. If McAfee is improperly installed due to power-off, shut-down,
closing of cmd.exe, or any other abnormal operation during the
installtion, please contact the Mindray service engineers.
3.7.9 Check System Information
In System Information screen, it displays the product configuration, the optional hardware
installation status, software version, hardware & boards, and driver related information. You can
check the product information here.
1. Press <F10 Setup>, and then click [About] to open the following screen.
To Next Page
Loading...
Need help?
General
