CONTENTS
18
Beach
Perfect for all salty conditions
— dry sand, wet sand, surf
and underwater.
Beach Modes are for salt-water beaches
including dry sand, wet sand, surf and
underwater conditions. Beach modes are
designed to minimise the noise generated
by the presence of conductive salt water
for a smooth, quiet detecting experience
in these conditions. Multi-IQ+ is better
able to reduce this noise than any single-
frequency can. Therefore Multi-IQ+ is the
only Frequency option.
Beach Modes specifically identify any
residual salt response and assign a
Target ID of 0 (zero), and a low tone similar
to that given to ferrous targets so that it is
easily distinguished from desirable targets,
and can be discriminated out.
General
Salt water beach general-purpose detecting. Excellent all round
performance for most targets in dry sand or wet sand.
Target Separation
Trash Rejection
Low Conductors
Salt water beach detecting for small or thin metal objects such
as fine jewellery items in dry or wet sand.
Target Separation
Trash Rejection
Deep
Salt water beach detecting for small or thin metal objects such
as fine jewellery, with aggressive settings for maximum depth.
Suitable for dry and wet sand.
Target Separation
Trash Rejection
Surf & Seawater
Salt water Beach detecting, suitable for difficult salt water
conditions, including in the surf zone and salt wash.
Target Separation
Trash Rejection
To Next Page
Loading...
Need help?
General
