MANTICORE® Default Settings
All Terrain Beach Goldfield
General Fast Low Conductors High Conductors Trash Reject General Low Conductors Deep Surf & Seawater General
Favourite Search Mode
No No No No No Yes No No No No
Frequency
Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+ Multi-IQ+
Audio Theme
Normal Depth Enhanced Normal Normal Normal Normal Prospecting Normal Prospecting
Threshold Level 0 0 0 0 0 0 0 0 0 12
Threshold Pitch 8 8 8 8 8 8 8 22 8 22
Profile Medium Medium Medium Rich Medium Medium Medium — Medium —
Ferrous Tone — — — — — — — On — Off
Min./Max. Pitch — Min. 12 / Max. 50 — — — — — — — —
Ferrous Pitch — 1 — — — — — — — —
Target Tones
2-Region All Tones — 5-Region All Tones 2-Region All Tones 5-Tone 5-Region All Tones 5-Region All Tones — 2-Tone —
Tone Break 50 — 4, 20, 60, 90 5 10, 20, 60, 90 10, 20, 60 ,90 10, 20, 60, 90 — 50 —
Tone Pitch 15/25, 36/44 —
2/2, 18/24, 25/32,
33/40, 41/48
2/2, 20/44 10, 14, 24, 36, 50
15/21, 22/24, 25/32,
33/40, 41/48
15/21, 22/24, 25/32,
33/40, 41/48
— 14, 40 —
Tone Volume 25, 25 — 4, 25, 25, 25, 25 8, 25 25, 25, 25, 25, 25 25, 25, 25, 25, 25 25, 25, 25, 25, 25 — 25, 25 —
Ferrous Tones
Ferrous Volume 8 4 4 8 12 12 12 12 12 12
Ferrous Pitch 1 1 1 1 1 1 1 1 1 1
Ferrous Limits
Preset Upper 9, Lower 4 Upper 7, Lower 3 Upper 9, Lower 3 Upper 9, Lower 3 Upper 10, Lower 6 Upper 8, Lower 5 Upper 8, Lower 5 Upper 8, Lower 5 Upper 8, Lower 5 Upper 6, Lower 1
Discrimination Pattern
Fe, 0 to 4
5 to 99
Fe, 0 to 5
5 to 99
Fe, 0 to 4
5 to 99
Fe, 0 to 5
6 to 99
Fe, 0 to 12
13 to 99
Fe, 0
1 to 99
Fe, 0
1 to 99
Fe, 0
1 to 99
Fe, 0
1 to 99
Fe, 0
1 to 99
Recovery Speed
5 7 6 5 5 4 3 2 4 6
Ground Balance
Manual 0 0 0 0 0 0 0 0 0 0
Tracking Off Off Off Off Off Off Off Off On On
Noise Cancel
0 0 0 0 0 0 0 0 0 0
Sensitivity
20
Vibration
Off
Lighting
Display 9
Keypad Off
Flashlight Off
Soft Keys
Side Favourite Mode
Left All Metal
Right Accept / Reject
Detector software updates may introduce changes to Search Modes and their default settings are subject to change.
All detector settings are applied at either a global or local level.
Global settings are applied to all Search Modes.
Local settings are only applied to the enabled Search Mode.