CONTENTS
40
Audio Theme
Audio Themes are configured for specific
detecting scenarios, and allow the user to
customise how their audio sounds to suit
their particular detecting style.
Audio Theme adjustment is local; only the current Search
Mode is affected by changes to this setting.
Audio Theme in the
Settings Menu.
CHOOSING AN AUDIO THEME
Choose the Audio Theme that best suits your location and detecting intent. While the choice of Theme is partly personal
preference, it is worthwhile to understand each Audio Theme and the individual benefits that they bring to specific
detecting scenarios.
Normal Enhanced Depth Prospecting
Threshold Type
Reference Reference Reference True
Threshold Level
0 to 25 0 to 25 0 to 25 0 to 25
Threshold Pitch
1 to 50 1 to 50 1 to 50 1 to 50
Profile
Simple, Medium,
Rich (Volume)
Simple, Medium,
Rich (Timbre)
Simple, Medium,
Rich (Volume)
—
Min. and Max. Pitch
— — 1 to 65 —
Ferrous Pitch
— — 1 to 65 —
Ferrous Tone
— — — On/Off
Target Tones
Enabled Enabled Disabled Disabled
Pitch driven by
Target ID Target ID Signal Strength Signal Strength
NORMAL
The Normal Audio Theme is a good choice for everyday detecting. It gives full‑sounding audio responses that vary in both
pitch and volume.
The pitch of audio responses is determined by the Target ID as defined by the Target Tones setting (page 44).
The volume of audio responses is modulated according to the signal strength/depth of the target, with strong/shallow
targets giving louder responses than weak/deep targets. Choose the amount of volume modulation by changing the
Profile.
This theme uses a ‘Reference’ threshold tone that blanks for rejected targets (see "'Reference' Threshold Tone" on
page 43). You can adjust the Threshold Level (Off by default) and Threshold Pitch.
To Next Page
Loading...
Need help?
General
