CONTENTS
19
Goldfield
Ideal for gold nugget
prospecting in mineralised
goldfield locations.
Goldfield General Mode is for gold
prospecting. Generally, gold nuggets are
found in remote goldfields where the
ground is often mineralised and targets are
more sparsely distributed.
For Goldfield General Mode, the default
Audio Theme is set to Prospecting
(page 41), providing a 'true' threshold
tone which maximises sensitivity to
weak target signals. When a target is
detected, the signal volume and pitch vary
proportionally to the strength of the
target signal.
Most goldfield locations have a variable
level of iron mineralisation that requires
constant Ground Balance adjustment,
therefore Tracking Ground Balance is the
default setting.
Goldfield Mode is suited to finding smaller
surface gold nuggets (and some larger
deeper ones) in mineralised ground.
General
Goldfield detecting, suitable for small nuggets in benign to
moderate soil mineralisation conditions.
Target Separation
Trash Rejection
To Next Page
Loading...
Need help?
General
