– 51 –
4. Press Upper/Lower limit (°C) of SET TEMP. in Heating. Select temperature by pressing
or button, and press OK button.
If you do not want to make the setting, press the cancel button.
Setting temperatures can be set in the following ranges.
Lower limit value Upper limit value
Cool/Dry/Auto 16 - 18°C 30 - 35°C
Heat 10 - 18°C 22 - 30°C
5. Select VALID or INVALID of Limit SET TEMP.
When you select VALID, the set temperature of the indoor unit which exceeds the upper limit
or is lower than the lower limit is changed to the upper or lower limit.
6. Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to set, press the No button.
Control Function Setting
You can set the temperature for energy saving setting and auto switch mode.
1. Press FUNCTION SETTING button on the OPERATOR MENU screen. page 10
2. Press the CONTROL FUNCTION SETTING button on the FUNCTION SETTING screen.
5
4
3
6
11
8
7
9
10
<Energy Saving setting>
3. Press Start TEMP. (°C) in COOL Mode of Energy saving Setting.
You can set the outside temperature to start the energy saving in cool and dry mode.
4. Press Release TEMP. (°C) in COOL Mode of Energy saving Setting.
You can set the outside temperature to end the energy saving in cool and dry mode.
5. Press Shift SET TEMP. (°C) in COOL Mode of Energy saving Setting.
You can set the shift value of set temperature in cool and dry mode of energy saving setting.
6. Press Start TEMP. (°C) in HEAT Mode of Energy saving Setting.
You can set the outside temperature to start the energy saving in heat mode.
7. Press Release TEMP. (°C) in HEAT Mode of Energy saving Setting.
You can set the outside temperature to end the energy saving in heat mode.
To Next Page
Loading...
Need help?
General
