– 67 –
<When saving the data>
4. Press the EXPORT CSV FILE button.
The data of selected units is saved.
Maintenance User Setting
Set the ID, password, of the maintenance user.
1. Press the MAINTENANCE USER SETTING button on the MAINTENANCE MENU
screen.
2
3
5
4
2. Setting and viewing the ID
Specify the maintenance user’s ID.
Press ID to input an ID. The input ID is displayed.
3. Setting and viewing the Password
Specify the maintenance user’s password.
Press Password to input a password. The input password is displayed.
4. Setting the maintenance user information
You can specify the maintenance user’s information.
You can enter text up to 3 lines maximum. When you begin a new line, press the
buttons.
5. Press the SET button. Press the YES button on the confi rmation screen.
When you do not want to save the settings, press the NO button.
Note
Up to 16 one-byte alphanumeric characters can be used for the ID, and up to 8 one-byte
alphanumeric characters for the password.
To Next Page
Loading...
Need help?
General
