– 55 –
Flap Control Setting
Motion range (upper and lower limit positions) of the fl ap at each air outlet can be set at a desired
range individually.
Caution
When changing contents of the individual fl ap control, stop the air conditioner.
1. Press FLAP CONTROL SETTING button on the OPERATOR MENU.
2
4
3
2. Press SELECT UNIT button. Select Group and Unit by pressing group name and unit
number, and press the OK button.
Model of unit is being asked. Please wait for a while.
If you do not want to make the setting, press the cancel button.
3. Select the upper and lower limit positions of each fl ap from 1 to 6 for the range of fl ap
motion.
4. Press the SET button.
When changing the range of fl ap motion for other unit, repeat 2. to 4..
To Next Page
Loading...
Need help?
General
