– 62 –
Unit Defi nition Settings (SC-SL4-BE only)
1. Press the UNIT DEFINITION button on the MAINTENANCE MENU screen.
page 61
3
2
2. Press the item to be set or changed on the list.
Each time the “TYPE” item is pressed, the unit type changes.
MULTI1 : calculating according to the amount of refrigerant fl ow. Used for KX Series.
MULTI2 : thermo ON/OFF calculation. Used for KX Series.
ON/OFF : calculating according to the unit operating time. Used for KX series, PAC.
SINGLE
: calculating only when compressor is turned ON. Applied to single split PAC
air conditioner that perform communication via Superlink adapter.
If the “CAPACITY” item is pressed, it can be changed. (0 – 200 [kW])
page 42
To change the page, press the
or button.
Note
• Please select same item for same system of watt-hour meter or gas meter.
• When you select MULTI1 or MULTI2, fan mode units are out of calculation. To calculate the
fan mode units, please select ON/OFF.
• Standby energy used during night etc. is not included in the calculation, and does not equal
the value of watt-hour meter or gas meter. Please correct the calculation by spreadsheet.
3. Press the SET button. Press the Yes button on the confi rmation screen.
When you do not want to make the setting, press the No button.
To Next Page
Loading...
Need help?
General
