– 66 –
Meter Defi nition (SC-SL4-BE only)
Meter group defi nition fi le and pulse constant defi nition fi le are needed for energy consumption
history.
1. Press the METER DEFINITION button on the MAINTENANCE MENU screen.
2
2. Insert the USB memory and press the IMPORT button. Select the folder on the Folder
Selection screen.
Note
• Meter group defi nition fi le of factory default is “nkei_fi le.csv” for new SL, or “kei_fi le.csv” for
previous SL.
• Pulse constant defi nition fi le of factory default is “pulse_fi le.csv”.
• By pressing the
or button, the page change.
• By pressing the
or button, the page move to the fi rst page or last page.
Operation Data Monitoring
You can monitor the operation data of indoor unit and outdoor unit.
1. Press the OPERATION DATA MONITORING button on the MAINTENANCE MENU
screen.
24
2. Press the SELECT UNIT button.
3. Press Indoor Unit address and/or Outdoor Unit address. Press the OK button.
The selected units are set.
When you do not want to set, press the Cancel button.
To Next Page
Loading...
Need help?
General
