α
Simple Application Controllers
What You Should Know Before Starting to Program 4
4-7
Please refer to the modem manufacturer’s manual for the necessar
re
uirements for models
other than the one’s listed here.
4.8.3 PC to Modem Configuration Check
Please setup the PC-Modem cable, connections, and specifications per the modem
instructions. Often modem drivers can be found on the manufacturer’s homepa
e. The
modem setup can be checked in the “Com/Confi
uration/Test” function.
Maker/Model 3Com
SP560V-P
AIWA
PV-AF3360
Remarks
Require command prefix AT AT
Set local echo E0 E0 Echo Off
Displays/suppress result codes Q1 Q1 Quiet mode;
No result codes.
Manage modem's serial port rate &B1 \J0 Fix serial port rate
Control DTR &D0 &D0 DTR override
Sets transmit data flow control &H0 \Q0 Flow control disabled
Sets Receive Data software flow
control
&I0 - Software flow control disabled
Sets Receive Data hardware flow
control (RTS)
&R1 - Modem ignores RTS
Set auto answer mode S0=2 S0=2 Number of rings to answer
Controls DSR operations &S0 &S0 DSR override; always ON
Other S15=8
Disable MNP
handshake
&M5
V.42 mode
If target modem has unique
command, please check
whether necessary or not.
Writes current configuration to
NVRAM
&W &W Above setting is saved to
NVRAM.
To Next Page
Loading...
Need help?
General
