OUTLINE
7
Note:1. Make sure that the front cover has been reinstalled securely.
2. The same serial number is printed on the capacity plate of the front cover
and the rating plate of the inverter. Before reinstalling the front cover, check
the serial numbers to ensure that the cover removed is reinstalled to the
inverter from where it was removed.
1.3.6 Removal and reinstallation of the wiring cover
"
""
"
Removal
The wiring cover is fixed by catches in positions 1) and 2).
Push either 1) or 2) in the direction of arrows and pull the wiring cover
downward to remove.
1)
2)
Wirin
hole
"
""
"
Reinstallation
Pass the cables through the wiring hole and reinstall the cover in the original
position.
To Next Page
Loading...
Need help?
General
