Mitsubishi Q02HCPU User Manual

11 - 29
11.1 Scan Time
11.1.4 Factors that can shorten scan time by changing the settings
11
CPU MODULE PROCESSING TIME
(2) Floating point arithmetic processing ( Section 9.1.2(2))
Note11.21
Note22
The time required for the arthmetic processing of the instruction using a floating point
can be shortened by selecting "Do not perform internal operation processing with
double precision" (remove the check mark on the setting screen) in the PLC system
setting.
Remark
Refer to the following manual for the arithmetic processing time of the instruction
using a floating point.
QCPU (Q Mode)/QnACPU Programming Manual (Common Instructions)
Note22
Figure 11.8 Floating point arithmetic processing screen
The Basic model QCPU, Process CPU, Redundant CPU and Universal model QCPU do not
support the floating-point arithmetic processing setting.
Basic
Process
Redundant
Universal
UD
Note11.21
N
ote11.21
Note11.21
Note11.21
Universal
UD
Redundant
Note11.21
Note11.21
Basic
Process
Note11.21
Note11.21
Remove checkmark!

Mitsubishi Q02HCPU Specifications

General

Brand	Mitsubishi
Model	Q02HCPU
Category	Controller
Language	English