11
Getting started
Note that a new battery does not reach the full capacity until it has been put
to normal use for several days.
To keep your battery in the best condition, leave the handset off the base for
a few hours at a time.
Running the battery right down at least once a week will help it last as long
as possible.
The charge capacity of the rechargeable battery will reduce with time as it
wears out, giving the handset less talk / standby time. Eventually it will need
to be replaced, please contact customer service helpline found in this user
guide.
After charging your handset for the rst time, subsequent charging time is
about 6–8 hours a day. The handset may become warm during charging. This
is normal.
1
All talk and standby times are approximate and depend on features selected
and usage pattern.
Date and time
IfyouhavesubscribedtoaCallerIDService,thedateandtimeisset
automaticallyforallhandsetswhenyoureceiveyourrstcall.
IfyoudonothaveaCallerIDservice,youcansetthedateand
timemanually.
1. Press
Menu
,scrollto
Date & Time
andpress
OK
.
2.
Enter Date
ishighlighted.Press
OK
.
3. EnterthedateusingtheformatDD-MM-YYYYe.g.04-08-2013for4
August2013andpress
OK
.
4. Scrolldownto
Enter Time
andpress
OK
.
5. Enterthetime(hh:mm)andpress
OK
.
Ifthecurrenttimeformatsettingis12hour,press
toselect
am
or
pm
.
6. Press
toreturntostandby.
NOTE
The date and time is retained during a power failure or when the battery is
discharged. You can also set the time and date format, see page 60.
Your IT.6T is now ready for use.