Motorola MC75A Integrator Guide

2 - 24 MC75A Enterprise Digital Assistant Integrator Guide
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following MC75A communication/charge cables are available:
• Serial (RS232) Charge cable (9-pin D female with power input receptacle)
• USB Client Charge cable (standard-A connector and a barrel receptacle for power)
• Auto charge cable
• DEX cable
• Modem inverter cable
• Charge only cable.
The following printer cables are available directly from Motorola.
• O’Neil Printer cable
• Zebra Printer cable.
Figure 2-24 Cables (MC75A Connector)
The communication/charge cables:
• Provide the MC75A with operating and charging power.
• Synchronize information between the MC75A and a host computer. With customized or third party software,
it can also synchronize the MC75A with corporate databases.
• Provide serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, see Communication Setup on page 2-25.
• Provide USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, see Communication Setup on page 2-25.
Dedicated printer cables provide communication with a printer.
Setup
The MC75A communication/charge cables can connect with a serial/USB device, such as a printer or host
computer, through its serial or USB port.

Motorola MC75A Specifications

General

Brand	Motorola
Model	MC75A
Category	Handhelds
Language	English