4 - 10 MC75A Enterprise Digital Assistant Integrator Guide
File Types
SCM uses three types of files:
•
System Configuration Template (.SCT) files are XML files that define the configurable parameters for a
device.
•
Registry Configuration Service Provider XML files for device provisioning.
•
CAB Provisioning Format (.CPF) file which is a .CAB archive that contains the provisioning XML. This file is
downloaded to the MC75A and merged upon a cold boot.
User Interface
SCM's user interface consists of a tree control on the left side of the window which displays all the configuration
categories, and a data grid table on the right which displays all the configurable controls for the selected category.
Figure 4-1 shows the main window for a device’s .sct file.
Figure 4-1
Main SCM Window
Menu Functions
Use the main menu to access the program functionality described in Table 4-1.
Table 4-1
SCM Menu Functions
Menu Item Description
File Menu
Open Config File Open a saved configuration file (.SCD).
Save Config Changes Save changes to the currently loaded configuration file.
Restore All Defaults Restore all parameter values to the default state. The default values are stored in a
System Configuration template file (i.e., MC75Aw.sct).
To Next Page
Loading...
Need help?
General