Chapter 5 MC75A6 - GSM Configuration
Introduction
This chapter explains how to verify MC75A6 service on an Global System for Mobile communications (GSM)
wireless network and establish settings.
GSM networks deliver mobile voice and data services, such as Short Message Service (SMS)/Text Messaging,
with full roaming capabilities across the world. High-speed Downlink Packet Access (HSDPA) enabled networks
offer Internet-based content and packet-based data services. This enables services such as internet browsing,
e-mail on the move, powerful visual communications, multimedia messages, and location-based services.
When using the MC75A as a phone, services can include speed dialing, call tracking, voice mail, call forwarding,
conference calling, and caller ID, depending on the type of service.
Also use the integrated phone as a modem to connect the MC75A to an ISP or work network. The GSM enabled
MC75A can connect to the Internet or work network using Cellular Line, or using the modem specified by the
mobile phone service provider.
Quick Startup Steps
To use the MC75A for phone and data connections:
1. Install the MC75A main battery. See Installing the Main Battery on page 1-2.
2. Fully charge the main battery and backup battery. See Charging the Battery on page 1-3.
3. Press the red Power button to suspend the MC75A.
4. Remove the battery.
5. Lift the SIM cover using the stylus tip.
NOTE Before using an MC75A on a wireless network, first select a provider, establish a voice and data-enabled
service plan, and configure the MC75A (where applicable). Refer to the MC75A User Guide for information on
how to use the phone and services.
To Next Page
Loading...
Need help?
General