EasyManuals Logo
Home>NETGEAR>Wireless Router>R6100

NETGEAR R6100 User Manual

NETGEAR R6100
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Troubleshooting
109
R6100 WiFi Router
LEDs Never Turn Off
When the router is turned on, the LEDs turn on for about 10 seconds and then turn off. If all
the LEDs stay on, there is a fault within the router.
If all LEDs are still on one minute after power-up:
Cycle the power to see if the router recovers.
Press and hold the Reset button to return the router to its factory settings. For more
information, see
Troubleshoot Your Network Using the Ping Utility on page 113.
If the error persists, you might have a hardware problem. Contact technical support at
www.netgear.com/support.
Internet LED Is Off
If the Internet LED does not light when the router has power, check the following:
Make sure that the Ethernet cable connections are secure at the router and at the
modem.
Make sure that power is turned on to the connected modem.
Be sure that you are using the correct cable.
When connecting the router’s Internet port to a cable or DSL modem, use the cable that
was supplied with the cable or DSL modem.
WiFi LED Is Off
If the Wireless LED stays off, check to see if the WFi On/Off button on the router has been
pressed. This button turns the wireless radios in the router on and off. The WiFi LED is lit
when the wireless radio is turned on.
Cannot Log In to the Router
If you are unable to log in to the router from a computer on your local network, check the
following:
If you are unable to log in to the router from a computer on your local network, check the
following:
If you are using an Ethernet-connected computer, check the Ethernet connection
between the computer and the router.
Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click Refresh to be sure that the Java applet is loaded.
Try quitting the browser and launching it again.

Table of Contents

Other manuals for NETGEAR R6100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR R6100 and is the answer not in the manual?

NETGEAR R6100 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)867 Mbit/s
USB version2.0
Rack mounting-
xDSL connectionNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity1
WLAN data transfer rates supported300, 867 Mbit/s
Ethernet LAN (RJ-45) ports5
Security algorithmsWEP, WPA, WPA2-PSK
Flash memory128 MB
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width180 mm
Height170 mm
Weight322 g

Related product manuals