3
DSP
4) Switch Displays
1. Changing Display
When several data display screens are available,
you can press the [DSP] key to move between them.
For instance, press the [DSP] key to change the
contents of the screen on the BMS.
Upon each [DSP] key-press, the screen changes
DSP1/4 to 4/4.
Items on each screen (DSP1/4 to 3/4) can be
changed by holding down the [DSP] key for one
second. (See next page)
• When the Secondary distance unit is set, a HD/
VD/SD screen is added. (See p.3-102 for
Secondary Unit setting)
<for “Ft-inch”>
[DSP]
[DSP]
DSP
3-23
To Next Page
Loading...
Need help?
General
