Nikon DTM-532 User Manual

3
STN
1-2. 1:Known → 2:Angle
Sighting the BS (backsight) Point by Inputting Azimuth Angle
Z
Y
X0
X
Y0
Station point
(Xi, Yi, Zi)
Backsight point
Instrument height
Azimuth
Press [2] on the “Backsight” screen to select
azimuth angle input.
If you don’t have any point name for the BS (only
input Azimuth), press the [ENT] key on BS field.
Input the azimuth angle to the BS point.
Pressing the [ENT] key without inputting an AZ
value automatically inputs 0º00’00”.
Sight the BS point and press the [ENT] key. ST and
F1 records are stored in the Job.
F1/F2 measurement is also available by the [F2]
softkey. (See p.3-37)
3-38

Nikon DTM-532 Specifications

General

Brand	Nikon
Model	DTM-532
Category	Measuring Instruments
Language	English