36
2
Setting Up the Microscope
When you use the product for the first time and when an objective or a device of the product is
changed, you must connect a PC to the product and perform the setup work with the designated
software for various settings.
Setup procedure
To perform the setup work, operate a PC and run the software, the “LVSetup” option in “LV Series
Support Tools,” provided with this product.
For details about operations and setup works of “LVSetup,” see “LV Series Support Tools software
manual.”
CAUTION
If you don’t perform the setup work, the product does not work correctly.
Be sure to setup the product as follows.
To Next Page
Loading...
Need help?
General
